MX-3 Ultrasonic Thickness Gauge

With the hand held MX-3 Ultrasonic micrometer, you can make reliable measurements or scan a length of material for the thinnest point.

The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

The MX-3 comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.

Applications:

Corrosion & Pitting Tube & Pipe Tanks

Boilers Glass Variety of Applications

Specifications:

Physical

Weight: 10 ounces

Size: 2.5 W x 4.75 H x 1.25 D inches (63.5 W x 120.7 H x 31.8 D mm)

Operating Temperature: -20 to 120F (-20 to 50C)

Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

Keypad: Sealed membrane that is resistant to both water and petroleum products. Six tactile-feedback keys.

Transducer:
- Dual element (transmit and receive). 1-10 MHz frequency range.
- Locking quick disconnect Lemo connectors.
- 4 foot cable.
- Custom transducers available for special applications.

Power Source
- Two 1.5V alkaline or 1.2V NiCad AA cells.
- Typically operates for 200 hours on alkaline and 130 hours on NiCad.

Display

- Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
- Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
- Bar graph indicates stability or reading.

Certification

Factory calibration traceable to national standards.

Warranty

5 year limited.

Measuring

Range: Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters) switch to select English or metric units.

Resolution: 0.001 inch (0.01 millimeter)

Velocity Range: .0492 to .3937 in/ms 1250-10,000 meters/sec

Built-in:

- Stainless steel reference disk for probe zeroing.
- Four readings per second for single point measurements or 16 per second in SCAN mode.
- Single and Two point calibration option included.