MX-5DL Ultrasonic Thickness Gauge
The MX-5 DL is a simple to operate Ultrasonic Thickness Gauge with an internal data logger. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5 DL .
The MX-5 DL will automatically log your readings in numeric order (1 - 1000 readings ). The gauge comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty .
Applications
Corrosion & Pitting Tube & Pipe Tanks
Boilers Glass Variety of Applications
Specifications
Physical
Weight: 10 ounces
Size: 2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x 31.8 D mm)
Operating Temperature: -20° to 120°F (-30° - 50 °C)
Case:
Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.
Keypad: Sealed membrane that is resistant to both water and petroleum products. Nine tactile-feedback keys.
Transducer:
- Dual element (transmit and receive).
- 1 to 10 MHz frequency range.
- Locking quick disconnect LEMO connectors.
- 4 foot cable (Optional cable lengths up to 100 feet.
*Custom transducers available for special applications.
Power Source
- Two 1.5V alkaline or 1.2V NiCad AA cells
- Typically operates for 200 hours on alkaline and 130 hours on NiCad.
*Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.
Display
- Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
- Backlight is selectable: on / off / auto ( illuminates only when taking measurement ).
- Measurements displayed in inches, inches/microsecond. millimeters, and mters/second.
- Bar graph indicates stability of reading.
Data Logger
Automatic numeric Data Logging system 1 to 1000 readings.
Certification
Factory calibration traceable to national standards.
Warranty
5 year limited
Measuring
Range:
- Measures from 0.025 to 19.999 inches (0.63 to 500 mm).
- switch to select English or metric units.
Resolution: 0.001 inches (0.01 millimeters)
Velocity Range: .0492 to .3937 in/ms 1250 to 10,000 meters/sec
Built in:
- Stainless steel reference disk for probe zeroing.
- Four readings per second for single point measurements or 16 per second in scan mode - captures the minimum thickness.
- Single and Two point calibration option included.
Features
Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
Data Ouput: RS232 output sends thickness readings to a printer, computer or other external storage device.